Cisco Prisma Gigabit 1310 1550 FiberLinX Modules Installation Guide
Prisma MediaCenter SNMP
Management Module Installation
Instructions
Management Module Installation
Instructions
Overview
Introduction
The Prisma® MediaCenter™ SNMP Management Module includes two twisted-
pair ports; one for management and one reserved for future use. The
Management Module also features a DB-9 serial port. Both twisted pair ports
include the AutoCross feature that automatically selects between a crossover
workstation or straight-through, depending on the connected device.
pair ports; one for management and one reserved for future use. The
Management Module also features a DB-9 serial port. Both twisted pair ports
include the AutoCross feature that automatically selects between a crossover
workstation or straight-through, depending on the connected device.
A chassis with an installed Management Module connects to the LAN via an
external 10/100 twisted pair connection. Connect the chassis to the network by
plugging one end of a CAT-5 twisted pair cable into the port labeled MGMT on
the Management Module. Plug the other end of the cable into a device (e.g.,
switch, hub, etc.) in the existing Ethernet network.
external 10/100 twisted pair connection. Connect the chassis to the network by
plugging one end of a CAT-5 twisted pair cable into the port labeled MGMT on
the Management Module. Plug the other end of the cable into a device (e.g.,
switch, hub, etc.) in the existing Ethernet network.
Purpose
These installation instructions provide product information and instructions for
installing the Prisma MediaCenter SNMP Management Module.
installing the Prisma MediaCenter SNMP Management Module.
Audience
This document is intended for authorized service personnel who have experience
working with similar equipment. The service personnel should have appropriate
background and knowledge to complete the procedures described in this
document.
working with similar equipment. The service personnel should have appropriate
background and knowledge to complete the procedures described in this
document.
Qualified Personnel
WARNING:
Allow only qualified and skilled personnel to install, operate, maintain, and
service this product. Otherwise, personal injury or equipment damage may
occur.