Cisco Cisco IPCC Web Option Installation Guide
Appendix B Registry Keys
Cluster Configuration Registry Keys
B-16
Remote Silent Monitoring Installation and Administration Guide
ClusterN_PhoneSim_CM1_Port
Port PhoneSim uses to send its SIP messages to Contact Manager 1. If TCP is
used, connections will be made to this port. If UDP is use, datagrams will be sent
to this port.
used, connections will be made to this port. If UDP is use, datagrams will be sent
to this port.
Type: REG_SZ
Value Required: Yes
Valid Values: Integer greater than 0 and less than or equal to 65534
Default Value: 5060
ClusterN_PhoneSim_CM2_HostName
(optional) IP address or hostname of the Contact Manager 2 that PhoneSim hones
its simphones to as a secondary (i.e., failover) Contact Manager for the cluster.
its simphones to as a secondary (i.e., failover) Contact Manager for the cluster.
Type: REG_SZ
Value Required: No
Valid Values: Valid IP address, in dotted decimal notation; or hostname
Default Value: None
ClusterN_PhoneSim_CM2_Port
Port PhoneSim uses to send its SIP messages to Contact Manager 2. If TCP is
used, connections will be made to this port. If UDP is use, datagrams will be sent
to this port.
used, connections will be made to this port. If UDP is use, datagrams will be sent
to this port.
Type: REG_SZ
Value Required: If ClusterN_PhoneSim_CM2_Port is specified
Valid Values: Integer greater than 0, and less than or equal to 65534
Default Value: 5060