Cisco Cisco Intelligent Automation for Cloud 4.0 Technical Manual
Remove Action Buttons in My VDCs
Document ID: 117674
Contents
Introduction
Before You Begin
Requirements
Components Used
Remove Action Buttons in My Server
IAC and Service Designer
Removing an Action Button
Related Information
Before You Begin
Requirements
Components Used
Remove Action Buttons in My Server
IAC and Service Designer
Removing an Action Button
Related Information
Introduction
This document describes how to remove action buttons in My VDCs popover.
Before You Begin
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on Cisco Intelligent Automation for Cloud (IAC) version 4.0.
Remove Action Buttons in My Server
Note: The procedure to create new action buttons is beyond the scope of this document.
IAC and Service Designer
The procedure for removing buttons in My VDCs requires the use of Service Designer.
Removing an Action Button
This example illustrates the steps required in order to remove the Release Floating IP Address action button.
Step 1: Find and open the file "IACServersPopover.js" for editing that is located at
"\src\widget\iac\IACVDCPopover.js"
"\src\widget\iac\IACVDCPopover.js"
Step 2: Search string button name Release Floating IP Address