Cisco Cisco IPCC Web Option Technical References
Peripheral Configuration
49
49
3.1.2. Peripheral Call Control Variable Map
The mapping of route request elements to Peripheral Variables is controlled
by the Call Control Variable Map field, which is found on the PG Explorer
tool.
by the Call Control Variable Map field, which is found on the PG Explorer
tool.
Figure 17: Call Control Variable Map Field
The Call Control Variable Map field can be used to configure which
peripheral variables should be reserved for a CTI application, and which ones
the PG can use. Following are the ways to control variable usage via the
CallControlVariableMap:
peripheral variables should be reserved for a CTI application, and which ones
the PG can use. Following are the ways to control variable usage via the
CallControlVariableMap:
Direct the PIM. The PIM can be directed on which call variables can be
accessed. For example, the following setting allows the PIM to set call
variable 1 and call variables 5 through 10 while preserving the existing
values of call variables 2 through 4 (that is, the PIM will not set call
variables 2 through 4).
accessed. For example, the following setting allows the PIM to set call
variable 1 and call variables 5 through 10 while preserving the existing
values of call variables 2 through 4 (that is, the PIM will not set call
variables 2 through 4).
Note:
This argument is from the perspective of the PIM.
/PIM=ynnnyyyyyy