Cisco Cisco Intelligent Automation for Cloud 4.3.2 User Guide
99
Provisioning and Managing Networks
Removing a Network
Removing a Network
You can remove a Layer 3 network, including its IP Pool, and disassociate it from port profiles. When you remove a
network, the process first disassociates the IP addresses from the chosen network, and then removes the network
mapping of this network.
network, the process first disassociates the IP addresses from the chosen network, and then removes the network
mapping of this network.
1.
Choose Setup > System Settings > Networks tab.
2.
Click Remove a Network.
3.
On the Remove Network form, choose the Network Name.
4.
Click Submit Order.
Managing Network IPs
To view a list of your networks and IP capacity information for each network:
1.
Choose Operations > Network Management.
2.
Explore the dashboard as needed.
Managing IP Address Exclusions
You will want to manage exclusions to facilitate Brownfielding existing networks, which may have existing hosts. These
hosts will have prior IP address assignments that need to be accounted for; these will need to be excluded from use. The
Network Management page also allows the CPTA to manage individual network utilization.
hosts will have prior IP address assignments that need to be accounted for; these will need to be excluded from use. The
Network Management page also allows the CPTA to manage individual network utilization.
1.
Choose Operations > Network Management.
2.
The Manage Networks form displays.
3.
Choose the Network from the top table.
4.
Use the IP Address Assignments table check box at the top of the table for bulk updates.
Note:
For updating single IP address, check the check box next to of any IP Address .
5.
When you are done, click Save to initiate the bulk update.
Adding a Network to a Community VDC
After a community VDC is provisioned, additional networks can be added. Since community VDCs are a community
virtual center, networks are added to the community VDC through the My Virtual Data Centers portal page. The network
to be added must already exist. Only community networks can be added to the community VDC. To add a network to the
community VDC:
virtual center, networks are added to the community VDC through the My Virtual Data Centers portal page. The network
to be added must already exist. Only community networks can be added to the community VDC. To add a network to the
community VDC:
1.
Choose My Cloud > My VDCs.
2.
Choose the community VDC in the list of virtual data centers that a network should be added to.
3.
Click the Add Network to VDC action.
4.
In the Network Name field, choose the network to be added. Only community networks are shown.
5.
In the Management Network field, optionally choose a management network to be associated with the community
network. The management network should be the same subnet size as the community network.
network. The management network should be the same subnet size as the community network.