Cisco Cisco Intelligent Automation for Cloud 4.3.1 Installation Guide
85
Configuring Cisco IAC With the Wizard
Setting System-Wide Services and Provisioning
For VMware vCenter Server, for example, you would then choose:
—
the Network POD instance that serves in this POD
—
the VMware vCenter Instance
—
the VMware Datacenter
—
the Cisco UCS Manager Instance
—
the Cisco UCS Director Baremetal Agent
—
the Provisioning UCS VLAN
—
the Provisioning Hypervisor VLAN
3.
Click Submit Order.
4.
Click on the number in the Requisition Number field to display the details.
5.
Click Close when the status says Completed.
Setting System-Wide Services and Provisioning
On the STEP 5 panel of the Wizard, you choose the system-wide services to offer and enter critical information for
provisioning the cloud servers, such as network domain name and default time zone. When you have completed Step 6,
click Next Step (the gray arrow pointing right).
provisioning the cloud servers, such as network domain name and default time zone. When you have completed Step 6,
click Next Step (the gray arrow pointing right).
Setting System-Wide Service Options
When a service is disabled, ALL users, including the CPTA, are disallowed from ordering the given service. Although
users can see the link to a disabled service, a “disabled” message displays, and “Submit” buttons are hidden on the
service forms.
users can see the link to a disabled service, a “disabled” message displays, and “Submit” buttons are hidden on the
service forms.
Note:
You can re-enable a disabled service at any time. Disabling an option only affects what users can order from the
catalog from the time the Set System Wide Service Options service order is fulfilled. It does not affect current services
already ordered.
already ordered.
1.
From the Wizard, choose Set System-wide Service Options.
2.
Choose the proper options based on your hardware inventory.
3.
Disable a service by clicking the No radio button, or re-enable a disabled service by clicking the Yes radio button.
4.
Click Submit Order.
5.
Click on the number in the Requisition Number field to display the details.
6.
Click Close when the status says Completed.
Specifying Provisioning Settings
Specify the settings for bare metal and virtual machine provisioning, then verify that the bare metal and virtual machine
provisioning settings are configured correctly.
provisioning settings are configured correctly.
1.
From the Wizard, choose Set Provisioning Settings.
2.
On the Server Provisioning Settings form, specify the following: