Cisco Cisco Intelligent Automation for Cloud 4.2 Installation Guide
47
Cisco Systems, Inc.
www.cisco.com
Configuring Cisco IAC With the Wizard
The Cisco Intelligent Automation for Cloud 4.2 Configuration Wizard guides you through the steps for setting up and
configuring the cloud administration and infrastructure.
configuring the cloud administration and infrastructure.
Accessing the Configuration Wizard
Special Note if Using the PSC Appliance
Because the Cisco Prime Service Catalog appliance has Prime Service Catalog ports 8080 and 6080 blocked by the
firewall, you will need to open these ports before accessing the IAC Configuration Wizard. You use the Manage Firewall
menu, accessible via the Linux OS Shelladmin Menu to open firewall ports as needed.
firewall, you will need to open these ports before accessing the IAC Configuration Wizard. You use the Manage Firewall
menu, accessible via the Linux OS Shelladmin Menu to open firewall ports as needed.
1.
Login to the Linux operating system as the shelladmin user.
Note:
You can do this via the VM Console in your vSphere Client, or via an SSH connection to the IP address of the
virtual machine (VM).
2.
On the Linux Login Prompt, type shelladmin for the user name, and Cisco1234! for the password.
—
Once logged in, you will see the following Shelladmin Menu:
Standalone Mode
Select a number from the menu below
1) Manage Users
2) Display Service: Status
3) Stop Services
4) Start Services
5) Manage Databases
6) Manage Firewall
7) Manage Puppet Master
8) View/Configure Network Interface
9) V1ew/Configure SHIP
10) View Logs
11) Show Version
12) Apply Patch
13) Loqin as Root
14) Shutdown Appliance
15) Reboot Appliance
16) Quit
3.
To choose Manage Firewall, enter 6 at the SELECT> prompt and press ENTER.
—
You will next see a menu that enables the opening of port numbers for certain services.
4.
Select Open Service Catalog Application Server Port.
5.
Select Open Service Link Application Server Port.
6.
Select Quit and then select Quit at the Shelladmin menu.