Cisco Cisco Intelligent Automation for Cloud 4.2 User Guide
55
Setting Up the Infrastructure
Setting Provisioning Settings
Verify Cloud Domain Password. Re-enter the domain user’s password.
Cloud Default Time Zone Linux. Choose the default time zone for Linux.
Cloud Default Time Zone Windows. Choose the default time zone for Windows.
Order Status History Cleanup. Choose Yes/No for enabling/disabling Order Status History Cleanup.
System Health History Grooming. Choose Yes/No for enabling/disabling System Health History Grooming.
Network Services Settings
4.
Enter the following in the Network Services Settings section:
NTP Server. Be sure NTP server entered matches up with the Server Configured Network services controller.
Routing Protocol. Choose a Routing Protocol to be used for routing external network traffic.
Process Orchestrator Network (subnet). Enter network address for configuring the static route between virtual
network devices and Cisco Process Orchestrator.
network devices and Cisco Process Orchestrator.
Process Orchestrator Network (subnet mask). Enter subnet mask for configuring the static route between virtual
network devices and Cisco Process Orchestrator.
network devices and Cisco Process Orchestrator.
Cisco Adaptive Security Appliance Image. Choose an image from the list to be used for provisioning Cisco
Adaptive Security Appliance.
Adaptive Security Appliance.
Cisco Cloud Services Router Image. Choose an image from the list to be used for provisioning Cisco Cloud
Services Router.
Services Router.
Cisco Prime Network Services Controller Image. Choose an image from the list to be used for provisioning Cisco
Prime Network Services Controller image.
Prime Network Services Controller image.
Cisco Virtual Security Gateway Image. Choose an image from the list to be used for provisioning Cisco Virtual
Security Gateway.
Security Gateway.
Netscaler 1000v Load Balancer Image. Choose an image from the list to be used for provisioning Citrix Netscaler
1000v Load Balancer Image.
1000v Load Balancer Image.
IP Address Source. Specifies whether IP Address Management will be handled by the Service Portal or by an
External IPAM system.
External IPAM system.
Username is entered by the system.
Enter the Password and re-enter the password.
WAN Router(s). When enabled, the system will require ASN and BGP configuration information for a pair of ASRs,
operating in an HA cluster. Options are Single ASR, HA Cluster, and Standalone.
operating in an HA cluster. Options are Single ASR, HA Cluster, and Standalone.
Ping Sweep. Controls whether ICMP echo requests are sent to every IP address within a subnet range as networks
are added to the system. When an ICMP response is received, the corresponding IP address will be marked as
assigned.
are added to the system. When an ICMP response is received, the corresponding IP address will be marked as
assigned.
Single or HA Cluster Details
5.
In the Single or HA Cluster Details section (the necessary network settings used to create Advanced Network
Services), enter the following:
Services), enter the following:
Provider Internet AS Number. Enter Autonomous System Number (ASN) for Internet Network.
Provider Enterprise AS Number. Enter Autonomous System Number (ASN) for Enterprise Network.