Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Daisy-Chained TV Displays for TV-Based Tile Matrix Video Walls

This cabling method is supported by both the Cisco DMP 4310G and SV-4K media

players and uses the native tile matrix capabilities of the TV displays in the video wall.

In this cabling method, the TV displays in the video wall group are connected together

using the DVI In/Out ports. One media player is connected to a single TV in the group

using HDMI and RS-232 connections.

shows an example of a 2x3 tile matrix configuration supported by the Cisco

DMP 4310G. This example shows one DMP controlling 4 displays in the 2x2 portion of

the video wall, and another DMP controlling 2 displays in the 2x1 portion of the video

wall.

Figure 56. Daisy-Chained 2x3 Tile Matrix Example with the Cisco DMP 4310G

IMPORTANT: The SV-4K media player has different behavior

than the Cisco DMP 4310G in this example. For the 2x1 portion of

the video wall, the Cisco DMP 4310G shrinks its canvas to fit the

signal resolution. However, the SV-4K media player crops a

1920x1080 canvas to the 960x1080 signal resolution rather than

shrinks it. Therefore, for the SV-4K you must specify the correct

template to match your signal resolution and your content must

match the template. For more information, see

161 of 285