Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Replacing a Failed Media Player While an Event
Script is Running

This task describes the steps to replace a failed media player with a new device that

continues to follow the same script.

After replacement, the new media player should:

Belong to the same groups and zones.

Respond to the zone/group state actions.

Display the same content as the media player it replaces.

To replace a failed media player while an event script is running, complete the
following steps:

1. Unplug the failed device and replace it with a new device.

2. Wait until auto-registration and provisioning completes, and the new device

appears in the Management Dashboard.

3. From Control Panel > Setup > Zones & Groups, un-map the failed device from

its Location, and map the new device to this Location.

4. From Control Panel > Control, manually stage content to the new device.

5. (For SV-4K only) From the Management Dashboard, go to:

d. DMP and TV Controls > DMP Commands

e. Run the Restart Runtime command for the new SV-4K device only.

6. Verify that the new device is showing the expected content.

7. Delete the failed device from Cisco StadiumVision Director. This device will be

named in the format "Unassigned-xx-xx-xx-xx-xx-xx", where xx-xx-xx-xx-xx-xx is

the MAC address.

272 of 285