Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

enable user TV control using the corresponding “Enable User Control” script action or

TV command.

You can verify the user TV control state for a particular Cisco DMP 4310G using the

Status Details area of the Management Dashboard. Select the General drop-down

menu under TV Status area and look at the value displayed in the User Input field as

shown in

Figure 6. TV Status User Input Field

Information About TV Display Specifications

Cisco StadiumVision Director requires that you configure certain commands and

attributes for the TVs used in the venue to ensure proper communication between the

media player and the TV. This configuration is defined in what is called a display

specification.

By default, Cisco StadiumVision Director includes display specifications for several

common TV display models. If your TV display model is not included in the default

specifications, then you need to add and configure it.

A different display specification is required for each unique TV type, based on how

images are centered and stretched (DMP 4310G only), and which serial commands are

used to control the TVs. In some cases, all TVs from a certain manufacturer can use the

same display specifications. In other cases, different TV models from the same

company might require different display specifications.

NOTE: As a best practice, configure your TV display

specifications before configuring Locations in Cisco

StadiumVision Director. You must select the “Display Spec” for

the type of TV (brand/model) that is physically installed when you

configure a Location.

26 of 285