Cisco Prisma II 1310 nm HDTx Transmitters Installation Guide
Checking Manufacturing Data using the ICIM
78-4023013-01 Rev C
57
Checking Manufacturing Data using the ICIM
To Check Manufacturing Data
You can display the manufacturing data for this module on the ICIM LCD.
Complete the following steps to access the manufacturing data.
Complete the following steps to access the manufacturing data.
1 From the MAIN menu, press the
key to highlight the Shelf and Slot fields.
2 Press the
SEL
key to address the Shelf number. Then press the
key or the
key to scroll to the number of the desired shelf.
3 Press the
ENTER
key. The Slot field is highlighted.
4 Press the
key or the
key to scroll to the number of the desired slot.
5 Press the
ENTER
key. The MODULE menu for this module will be selected, as
shown on the left below. Press the
key to enter the start of the MFG. DATA
menus, as shown on the right below.
Use the
and
keys to scroll through the manufacturing data.