Cisco Cisco Prisma II ICIM 2 Installation Guide
Chapter 3 Operation using ICIM
52
78-4023013-01 Rev C
Configuring the Module using the ICIM
To Configure Parameters using the ICIM
You can use the ICIM to configure the parameters of this module.
1 From the MAIN menu, press the
key to highlight the Shelf and Slot fields.
2 Press the
SEL
key to address the Shelf number. Then press the
key or the
key to scroll to the number of the desired shelf.
3 Press the
ENTER
key.
Result: The Slot field is highlighted.
4 Press the
key or the
keys to scroll to the number of the desired slot.
5 Press the
ENTER
key.
Result: The MODULE menu appears on the ICIM LCD.
6 To configure the module, press the
CFG
key.
7 Press the
key or the
key to scroll through the configurable controls
until you find the parameter of interest.
8 Press the
SEL
key to select the highlighted control.
9 Press the
key or the
key to activate or change the value of the selected
control.
10 Press the
ENTER
key to save the changes and return to the MAIN menu.
CONFIG Menus
When the CONFIG menu is selected, the Shelf number field is highlighted. The
shelf and slot number fields may only be incremented with the
shelf and slot number fields may only be incremented with the
key or the
key. The
key highlights the Slot number field. Once you exit the slot field, the
Up and Down arrows will scroll through the parameters that are specific to this
module.