Cisco Cisco StadiumVision Mobile Streamer Maintenance Manual

Page of 8
How to Configure Automatic Proof of Play 
Export
Dynamic Signage Director 
Software Release: 5.0.0-123 and Later Releases
First Published: 2016-10-10
Contents
 
 
 
 
 
Introduction 
The Automatic Proof of Play (PoP) Export feature is useful when you want to use another tool or application to 
consume the PoP CSV data from Cisco Vision Dynamic Signage Director.
When PoP is enabled for a script, the Summary and Detailed PoP data (in CSV format) is automatically exported to a 
designated server using Secure FTP (SFTP) or Secure HTTP (HTTPS). 
After you have enabled the automatic export feature globally in the system, and also PoP for a script, you can verify 
the status of the export function under the new “Transmitted” column on the Control Panel Proof of Play screen. A 
green icon means the data has been transmitted; red means it failed.
Retry Behavior for Failed Transmission
After 30 seconds from script completion (the default Delay Auto Upload period), the system automatically attempts to 
export the PoP data to the designated server. If the transmission fails, the following behavior occurs:
 
The system initially retries up to three times (or, the number of times specified in the Pop Upload Retry Count 
property). 
 
If the PoP export fails after the initial retry attempts, a system task (PofpUploadRetryTask) runs in the 
background to detect any failed transmissions.
 
The system task continues to attempt the PoP data export up to a maximum of 50 retries (or, the number of 
times specified in the Max Pop Upload Retry Count property.)
NOTE:
 When Automatic PoP Export is enabled, the standard PoP reporting features remain available in Cisco Vision 
Dynamic Signage Director Release 5.0. You do not need to do manual report generation if Automatic PoP Export is 
enabled.
Cisco Systems, Inc.
1

Summary of Contents of maintenance manual for Cisco Cisco StadiumVision Mobile Streamer

  • Page 1: IntroductionHow to Configure Automatic Proof of Play Export Dynamic Signage Director Software Release: 5.0.0-123 and Later Releases First Published: 2016-10-10...
  • Page 2: Required ConfigurationHow to Deploy WiFi Network Connectivity on the SV-4K Requirements Requirements  ■ A server is available on the network over...
  • Page 3How to Deploy WiFi Network Connectivity on the SV-4K Required Configuration  4. Then, based on the File Transfer Protocol property...
  • Page 4: Workflow SummaryHow to Deploy WiFi Network Connectivity on the SV-4K Optional Configuration Optional Configuration This section describes the optional settings that...
  • Page 5How to Deploy WiFi Network Connectivity on the SV-4K Workflow Summary  1. From the Management Dashboard, go to Dynamic Signage...
  • Page 6How to Deploy WiFi Network Connectivity on the SV-4K Workflow Summary  1. From the Control Panel, go to Control.  2....
  • Page 7How to Deploy WiFi Network Connectivity on the SV-4K Workflow Summary  1. From the Control Panel, go to Setup.  2....
  • Page 8How to Deploy WiFi Network Connectivity on the SV-4K Workflow Summary THE SPECIFICATIONS AND INFORMATION REGARDING THE PRODUCTS IN THIS...
downloadlike
ArtboardArtboardArtboard
Report Bug