Cisco Cisco SG300-28 28-Port Gigabit Managed Switch Maintenance Manual
Administration: Discovery
Configuring LLDP
Cisco Small Business 200, 300 and 500 Series Managed Switch Administration Guide (Internal Version)
153
9
To view LLDP overloading information:
STEP 1
Click Administration > Discovery - LLDP > LLDP Overloading.
This page contains the following fields for each port:
•
Interface—Port identifier.
•
Total (Bytes)—Total number of bytes of LLDP information in each packet
•
Left to Send (Bytes)—Total number of available bytes left for additional
LLDP information in each packet.
LLDP information in each packet.
•
Status—Whether TLVs are being transmitted or if they are overloaded.
STEP 2
To view the overloading details for a port, select it and click Details.
This page contains the following information for each TLV sent on the port:
•
LLDP Mandatory TLVs
-
Size (Bytes)—Total mandatory TLV byte size.
-
Status—If the mandatory TLV group is being transmitted, or if the TLV
group was overloaded.
group was overloaded.
•
LLDP MED Capabilities
-
Size (Bytes)—Total LLDP MED capabilities packets byte size.
-
Status—If the LLDP MED capabilities packets were sent, or if they were
overloaded.
overloaded.
•
LLDP MED Location
-
Size (Bytes)
—Total LLDP MED location packets byte size.
-
Status
—If the LLDP MED locations packets were sent, or if they were
overloaded.
•
LLDP MED Network Policy
-
Size (Bytes)
—Total LLDP MED network policies packets byte size.
-
Status
—If the LLDP MED network policies packets were sent, or if they
were overloaded.
•
LLDP MED Extended Power via MDI
-
Size (Bytes)
—Total LLDP MED extended power via MDI packets byte
size.