Cisco Cisco SG300-28 28-Port Gigabit Managed Switch Technical References
SYSLOG Commands
78-21485-01 Command Line Interface Reference Guide
311
20
Example
The following example configures the VLAN 10 as the source interface.
switchxxxxxx(config)# logging
source-interface-ipv6
vlan 100
20.5
logging console
Use the logging console Global Configuration mode command to limit messages
logged to the console to messages to a specific severity level. Use the no form of
this command to restore the default.
logged to the console to messages to a specific severity level. Use the no form of
this command to restore the default.
Syntax
logging console
level
no logging console
Parameters
level—Specifies the severity level of logged messages displayed on the console.
The possible values are: emergencies, alerts, critical, errors, warnings,
notifications, informational and debugging.
The possible values are: emergencies, alerts, critical, errors, warnings,
notifications, informational and debugging.
Default Configuration
Informational.
Command Mode
Global Configuration mode
Example
The following example limits logging messages displayed on the console to
messages with severity level errors.
messages with severity level errors.
switchxxxxxx(config)#
logging console errors
20.6
logging buffered
Use the logging buffered Global Configuration mode command to limit the
SYSLOG message display to messages with a specific severity level, and to
SYSLOG message display to messages with a specific severity level, and to