Cisco Cisco SG300-28 28-Port Gigabit Managed Switch Technical References
IPv6 First Hop Security
78-21485-01 Command Line Interface Reference Guide
999
55
exit
ipv6 nd inspection policy policy1
device-role router
exit
Example 3. The following example removes an attached ND Inspection policy:
no ipv6 nd inspection policy policy1
Policy policy1 is applied on the following interfaces:
gi1, gi2
The policy1 will be detached and removed, are you sure [Y/N]Y
55.24 ipv6 nd inspection sec-level minimum
To globally specify the minimum security level value, use the ipv6 nd inspection
sec-level minimum command in Global Configuration mode. To return to the
default, use the no form of this command.
sec-level minimum command in Global Configuration mode. To return to the
default, use the no form of this command.
Syntax
ipv6 nd inspection sec-level minimum
value
no ipv6 nd inspection sec-level minimum
Parameters
value
—Sets the minimum security level. Range: 0–7.
Default Configuration
All messages are bridged.
Command Mode
Global configuration
User Guidelines
This command specifies the minimum security level parameter value when the
drop-unsecured feature is configured.
drop-unsecured feature is configured.