Cisco Cisco Email Security Appliance C190 Technical References

Reset and delete the reporting database

Enable reporting daemons

Disable reporting daemons

Reset and delete the tracking database

Reset configuration to the initial manufacturer values

The following example shows the diagnostic command used to display the contents of the ARP cache 
and to flush all network related caches.

mail.example.com> diagnostic

Choose the operation you want to perform:

- RAID - Disk Verify Utility.

- DISK_USAGE - Check Disk Usage.

- NETWORK - Network Utilities.

- REPORTING - Reporting Utilities.

- TRACKING - Tracking Utilities.

- RELOAD - Reset configuration to the initial manufacturer values.

[]> network

Choose the operation you want to perform:

- FLUSH - Flush all network related caches.

- ARPSHOW - Show system ARP cache.

- NDPSHOW - Show system NDP cache.

- SMTPPING - Test a remote SMTP server.

- TCPDUMP - Dump ethernet packets.

[]> arpshow

System ARP cache contents:

(10.76.69.3) at 00:1e:bd:28:97:00 on em0 expires in 1193 seconds [ethernet]

(10.76.69.2) at 00:1e:79:af:f4:00 on em0 expires in 1192 seconds [ethernet]

(10.76.69.1) at 00:00:0c:9f:f0:01 on em0 expires in 687 seconds [ethernet]

(10.76.69.149) at 00:50:56:b2:0e:2b on em0 permanent [ethernet]

Choose the operation you want to perform:

- FLUSH - Flush all network related caches.

diagnostic reporting deletedb

diagnostic reporting enable

diagnostic reporting disable

diagnostic tracking deletedb

diagnostic reload