Cisco Cisco Email Security Appliance C190 Technical References

[N]>

The following interfaces are configured:

1. Management

2. ALL

Enter the name or number of one or more interfaces to capture packets from, separated by 

commas (enter ALL to use all interfaces):

[2]>

Select an operation. Press enter to continue with the existing filter.

- PREDEFINED - PREDEFINED filter.

- CUSTOM - CUSTOM filter.

- CLEAR - CLEAR filter.

[]>

Capture settings successfully saved.

Current Settings:

  Maximum File Size:  200 MB

  Limit:              None (Run Indefinitely)

  Interface(s):       ALL

  Filter:             (tcp port 25)

Choose the operation you want to perform:

- START - Start packet capture.

- SETUP - Change packet capture settings.

[]>

The 

ping

 command allows you to test connectivity to a network host from the appliance. 

Commit: This command does not require a ‘commit’.

Cluster Management: This command is restricted to machine mode. It is further restricted to the login 
host (i.e., the specific machine you are logged onto). This command requires access to the local file 
system.

Batch Command: This command does not support a batch format.

mail3.example.com> ping

Which interface do you want to send the pings from?

1. Auto

2. Management (192.168.42.42/24: mail3.example.com)

3. PrivateNet (192.168.1.1/24: mail3.example.com)

4. PublicNet (192.168.2.1/24: mail3.example.com)

[1]> 1

Please enter the host you wish to ping.

[]> anotherhost.example.com