Cisco Cisco Email Security Appliance C190 Technical References

mail3.example.com> systemsetup

WARNING: The system setup wizard will completely delete any existing

'listeners' and all associated settings including the 'Host Access Table' -

mail operations may be interrupted.

Are you sure you wish to continue? [Y]> y

Before you begin, please reset the administrator password to a new value.

Old password:

New password:

Retype new password:

*****

You will now configure the network settings for the IronPort C100.

Please create a fully qualified hostname for the IronPort C100 appliance

(Ex: "ironport-C100.example.com"):

[]> ironport-C100.example.com

*****

You will now assign an IP address for the "Data 1" interface.

Please create a nickname for the "Data 1" interface (Ex: "Data 1"):

[]> Data 1

Enter the static IP address for "Data 1" on the "Data 1" interface? (Ex:

"192.168.1.1"):

[]> 192.168.1.1

What is the netmask for this IP address? (Ex: "255.255.255.0" or "0xffffff00"):

[255.255.255.0]>

You have successfully configured IP Interface "Data 1".

*****

Would you like to assign a second IP address for the "Data 1" interface? [Y]> n

What is the IP address of the default router (gateway) on your network?:

[192.168.1.1]> 192.168.2.1

*****

Do you want to enable the web interface on the Data 1 interface? [Y]> y

Do you want to use secure HTTPS? [Y]> y

Note: The system will use a demo certificate for HTTPS.

Use the "certconfig" command to upload your own certificate.

*****

Do you want the IronPort C100 to use the Internet's root DNS servers or would

you like it to use your own DNS servers?

1. Use Internet root DNS servers

2. Use my own DNS servers

[1]> 2