Cisco Cisco Email Security Appliance C190 Technical References

-->

For enhanced security, if encryption of sensitive data in the appliance is enabled in 

fipsconfig

 

command, you cannot use 

Plain passwords

 option. 

This section contains the following CLI commands:

The 

clusterconfig

 command is used to configure cluster-related settings. If this machine is not part of 

a cluster, running clusterconfig will give you the option of joining a cluster or creating a new cluster.

The 

clusterconfig 

command provides additional subcommands:

The following commands are available when you are not in a cluster.

clusterconfig new <name> — 

This will create a new cluster with the given name.  This machine 

will be a member of this cluster and a member of a default cluster group called "Main Group".

<name>

 - The name of the new cluster.

clusterconfig join [--port=xx] <ip_of_remote_cluster> [<admin_password>]<groupname> 

— 

This will add this machine to a cluster.

<ip_of_remote_cluster>

 - The IP address of another machine in the cluster.

<admin_password >

- The admin password of the cluster.  This should not be

                     specified if joining over CCS.

<groupname>

 - The name of the group to join.

<port>

 - The port of the remote machine to connect to (defaults to 22).

clusterconfig prepjoin print

This will display the information needed to prepare the joining of this machine to a cluster over a CCS 
port.

The following commands are available when you are in a cluster.

clusterconfig addgroup <groupname> — 

Creates a new cluster group.  The group starts off with 

no members.

clusterconfig renamegroup <old_groupname> <new_groupname> — 

Change the name of a cluster 

group.