Jura 13341 User Manual

3 Familiarising yourself with the control options

It is easy to make permanent settings for the amount of water for all

speciality coffees as well as hot water and steam according to the

cup size. As in the following example, adjust the amount of water

once. Every time you prepare a drink in the future, this amount of

water will be dispensed.

The permanent settings for adapting the amount of water to the cup

size for all speciality coffees, hot water and steam follow this

model.

Example: Proceed as follows to make permanent settings for the

amount of water for a coffee.

Precondition:

READY

is displayed.

Place a cup under the coffee spout.

o T Touch the Coffee symbol.

1 COFFEE

is displayed for about two seconds. The Coffee

symbol is active.

READY

. T Touch the Start symbol for about three seconds, until

ENOUGH COFFEE ?

appears on the display.

Preparation starts and the coffee flows into the cup.

. T Touch the Start symbol as soon as there is sufficient coffee

in the cup.

Preparation stops.

appears briefly on the display. The set

amount of water for one coffee will be permanently stored.

READY

appears on the display.

You can alter these settings at any time by repeating the

above procedure.

You can also make permanent settings for the amount of

water for all speciality coffees in programming mode, in the

BUTTONS

programme item.

You can make permanent settings in programming mode. For

example, you can change product settings such as aroma and the

amount of water or activate an energy saving mode.

Simply by turning and pressing the Rotary Switch you can navigate

through the easy-to-understand programme items and make per-

manent settings.

Setting the water for
the cup size

Permanent settings in
programming mode