Jura 13341 User Manual

6 Maintenance

Precondition:

READY

is displayed.

Place a receptacle under the coffee spout.

k T Keep the Rotary Switch pressed until

RINSE

appears.

k T Press the Rotary Switch to enter the programme item.

RINSE

k T Press the Rotary Switch to initiate the rinse operation.

RINSING

, water flows out of the coffee spout.

Rinsing stops automatically and your IMPRESSA is then

ready for use.

After 50 litres of water have flowed through, the filter will

cease to work. Your IMPRESSA will automatically prompt you

to change the filter.

After two months, the filter will cease to work. You can check

the elapsed time by referring to the date plate on the cartridge

holder in the water tank.

If the CLARIS Blue filter cartridge is not activated, you will not

be prompted to change the filter.

You can also try out the ‘changing the filter’ operation online.

Visit the Knowledge Builder at www.jura.com.

Proceed as follows to change the CLARIS Blue filter cartridge when

prompted to do so by your IMPRESSA.

Precondition:

READY

FILTER

is displayed and the mainte-

nance button c lights up.
c T Press the maintenance button.

CHANGE

Remove and empty the water tank.

Lift the cartridge holder.

Take out the old filter cartridge and the extension.

Fit the extension on top of a new filter cartridge.

Changing the filter

Changing after a prompt