Jura 13341 User Manual

6 Maintenance

The cleaning operation is now complete. The IMPRESSA is

once more ready for use.

You can initiate the ‘Cleaning the machine’ operation manually.

Precondition:

READY

is displayed.

k T Keep the Rotary Switch pressed until

RINSE

appears.

k T Press the Rotary Switch to enter the programme item.

RINSE

g T Turn the Rotary Switch until

CLEAN

is displayed.

k T Press the Rotary Switch.

EMPTY TRAY

Continue with the second prompt to take action (indicated

by a T), as is described under ‘Cleaning after a prompt’.

The IMPRESSA builds up deposits of limescale over time and auto-

matically prompts you to descale it when necessary. The degree of

calcification depends on the degree of hardness of your water.

If the descaling agent comes into contact with the skin or eyes, this

can cause irritation.

Avoid contact with the skin or eyes.

If descaling agent does come into contact with the skin or

eyes, rinse off with clean water. Should you get any descaling

agent in your eye, see a doctor.

If the wrong descaling agent is used, the machine could be dam-

aged and/or traces of detergent could be left behind in the water.

Use only original JURA maintenance products.

If the descaling operation is interrupted, there may be damage to

the machine.

Allow the descaling programme to run to the end.

If the descaling agent comes into contact with sensitive surfaces,

damage cannot be ruled out.

Clean up any splashes immediately.

Manual cleaning

Descaling the machine

CAUTION