Cisco Cisco Firepower Management Center 4000
36-13
FireSIGHT System User Guide
Chapter 36 Using the Network Map
Working with Custom Network Topologies
Importing Networks from a Network Discovery Policy
License:
FireSIGHT
One way you can add networks to your custom topology is to import the networks that you configured
the FireSIGHT System to monitor in a network discovery policy. For information on discovery policies,
see
the FireSIGHT System to monitor in a network discovery policy. For information on discovery policies,
see
To import networks from a network discovery policy:
Access:
Admin
Step 1
On the Edit Topology page, click
Import Policy Networks
.
A pop-up window appears.
Step 2
From the drop-down list, choose the network discovery policy you want to use and click
Load
.
Step 3
The monitored networks in your network discovery policy populate the page.
For example, if you configured your network discovery policy to monitor the 10.0.0.0/8, 192.168.0.0/16,
and 172.12.0.0/16 networks, those networks appear on the page.
and 172.12.0.0/16 networks, those networks appear on the page.
Step 4
To add networks from a different network discovery policy, repeat steps
Step 5
Optionally, follow the procedures in the following sections, depending on how you want to build your
custom topology:
custom topology:
•
•
Manually Adding Networks to Your Custom Topology
License:
FireSIGHT
If importing the Cisco-discovered topology and importing networks from your network discovery policy
creates an inaccurate or incomplete representation of your network deployment, you can add networks
to your custom topology manually.
creates an inaccurate or incomplete representation of your network deployment, you can add networks
to your custom topology manually.