Cisco Cisco Firepower Management Center 4000

The Information page appears.

Click 

.

The Database Settings page appears.

Select the 

check box.

The 

 field appears. See step 

 for more information.

Type the fully qualified domain name (FQDN), IPv4 address, or IPv6 address of the Defense Center in 
the 

 field, depending on your third-party application requirements.

If you type an FQDN, you must make sure that the client can resolve the FQDN of the Defense Center. 
If you type an IP address, you must make sure that the client can connect to the Defense Center using 
the IP address.

Next to 

, click 

 and follow your browser’s prompts to download the 

client.zip

 

package.

See the FireSIGHT System Database Access Guide for information on using the tools in the package you 
downloaded to configure database access.

To add database access for one or more IP addresses, click 

.

An 

 field appears in the 

 field.

In the 

 field, you have the following options, depending on the IP addresses you want to add: 

an exact IP address (for example, 192.168.1.101)

an IP address block using CIDR notation (for example, 192.168.1.1/24)

For information on using CIDR in the FireSIGHT System, see 

.

any

, to designate any IP address

Click 

.

The IP address is added to the database access list. 

Optionally, to remove an entry in the database access list, click the delete icon (

).

Click 

.

Your database access settings are saved.

Click 

 to revert to the last saved database settings.

Any

When you first set up an appliance, you configure its network settings so that it can communicate on 
your internal, protected management network. To change these settings and to configure additional 
network settings such as proxies, use the Network page (

, then click 

).