Cisco Cisco Firepower Management Center 4000

You must apply the health policy to the appropriate appliances if you want your settings to take effect. 
See 

 for more information.

Any

Use the FireAMP Status Monitor module to alert you in the following situations:

the Defense Center cannot connect to the Cisco cloud after an initial successful connection

you deregister a cloud connection using the FireAMP portal

In these cases, the module status changes to Critical and provides the cloud name associated with the 
failed connection. For information on configuring a cloud connection, see 

.

Admin/Maint

In the Health Policy Configuration page, select 

.

The Health Policy Configuration — FireAMP Status Monitor page appears.

Select 

 for the 

 option to enable use of the module for FireAMP status monitoring.

You have three options:

To save your changes to this module and return to the Health Policy page, click 

.

To return to the Health Policy page without saving any of your settings for this module, click 

.

To temporarily save your changes to this module and switch to another module’s settings to modify, 
select the other module from the list at the left of the page. If you click 

 when you 

are done, all changes you made will be saved; if you click 

, you discard all changes.

You must apply the health policy to the Defense Center if you want your settings to take effect. See 

 for more information.

FireSIGHT

Use the FireSIGHT Host License Limit health status module to set FireSIGHT Host amount warning 
limits. If the number of remaining FireSIGHT Hosts on the monitored device falls below the Warning 
Hosts limit, the status classification for that module changes to Warning. If the number of remaining 
FireSIGHT Hosts on the monitored device falls below the Critical Hosts limit, the status classification 
for that module changes to Critical. That status data feeds into the health monitor.

The maximum number of hosts you can set for either limit is 1000, and the Critical host limit number 
must be lower than the Warning limit. 

Admin/Maint