Cisco Cisco Firepower Management Center 4000
D-21
FireSIGHT System User Guide
Appendix D Command Line Reference
Show Commands
Access
Basic
Syntax
show processes [sort-flag] [filter]
where
sort-flag
can be
-m
to sort by memory (descending order),
-u
to sort by username rather than
the process name, or
verbose
to display the full name and path of the command. The
filter
parameter
specifies the search term in the command or username by which results are filtered. The header row is
still displayed.
still displayed.
Example
> show processes -u user1
route
Displays the routing information for an ASA FirePOWER module.
Access
Basic
Syntax
show route
Example
> show route
routing-table
If no parameters are specified, displays routing information for all virtual routers. If parameters are
specified, displays routing information for the specified router and, as applicable, its specified routing
protocol type. All parameters are optional. This command is not available on virtual devices and
ASA FirePOWER devices.
specified, displays routing information for the specified router and, as applicable, its specified routing
protocol type. All parameters are optional. This command is not available on virtual devices and
ASA FirePOWER devices.
Access
Basic
Syntax
show routing-table [name] [ ospf | rip | static ]
where
name
is the name of the specific router for which you want information, and
ospf
,
rip
, and
static
specify the routing protocol type.
Example
> show routing-table Vrouter1 static
serial-number
Displays the chassis serial number. This command is not available on virtual devices.