Cisco Cisco Firepower Management Center 4000
6-42
FireSIGHT System User Guide
Chapter 6 Managing Devices
Managing Stacked Devices
Step 1
Select
Devices > Device Management
.
The Device Management page appears.
Step 2
Next to the stacked device where you want to edit the configuration, click the edit icon (
).
The Stack page for that device appears.
Step 3
Click
Devices
.
The Devices page appears.
Step 4
From the
Selected Device
drop-down list, select the device you want to modify.
Step 5
Use the sections on the Devices page to make changes to the individual stacked device as you would a
single device.
single device.
Configuring Interfaces on a Stacked Device
License:
Any
Supported Devices:
3D8140, 3D8200 family, 3D8300 family, 3D9900
Except for the management interface, you configure stacked device interfaces on the Interfaces page of
the primary device in the stack. You can select any device in the stack to configure the management
interface. See
the primary device in the stack. You can select any device in the stack to configure the management
interface. See
for more information.
The Interfaces page of a Series 3 stacked device includes the hardware and interfaces views that you find
on an individual device. The interfaces page of a 3D9900 does not include these views. See
on an individual device. The interfaces page of a 3D9900 does not include these views. See
for more information.
To configure interfaces on a stacked device:
Access:
Admin/Network Admin
Step 1
Select
Devices > Device Management
.
The Device Management page appears.
Step 2
Next to the stacked device where you want to configure interfaces, click the edit icon (
).
The Stack page for that device appears.
Step 3
Click
Interfaces
.
The Interfaces page appears.
Step 4
From the
Selected Device
drop-down list, select the device you want to modify.
Step 5
Configure interfaces as you would on an individual device. See
for more information.
Separating Stacked Devices
License:
Any
Supported Devices:
3D8140, 3D8200 family, 3D8300 family, 3D9900