Cisco Cisco Firepower Management Center 4000

You can use the Management section to specify the management host and regenerate the virtual IP. You 
can also specify management options regarding local event storage and whether packet data should be 
transferred to the Defense Center.

You can click the slider to block the communication channel between the Defense Center and the 
managed device. Click the slider to re-enable the communication channel.

Admin/Network Admin

Select 

.

The Device Management page appears.

Next to the device where you want to modify management options, click the edit icon (

).

The Interfaces tab for that device appears.

Click 

.

The Devices tab appears.

For stacked devices, you modify management options on an individual device on the Devices page of the 
appliance editor.

Next to the 

 section, click the edit icon (

).

The Management pop-up window appears.

In the 

 field, enter the name or IP address of the management host.

Clear the 

 check box to disable management of the device. Select the check box to enable 

management.

Select the 

 check box to allow packet data to be stored on the Defense Center with events. 

Clear the check box to prevent the managed device from sending packet data with the events.

Click 

.

Your changes are saved. Note that your changes do not take effect until you apply the device 
configuration; see 

 for more information.

Host

The current management hostname or IP address of the device.

Status

Whether local event storage is enabled for the device.

Transfer Packets

Whether packet data is transferred to the Defense Center.