Cisco Cisco Firepower Management Center 4000
10-3
FireSIGHT System User Guide
Chapter 10 Setting Up Hybrid Interfaces
Adding Logical Hybrid Interfaces
Step 15
For
Type
, select either Normal or SFRP.
For SFRP options, see
for more information.
Step 16
Click
OK
.
The IP address is added.
Tip
To edit an IP address, click the edit icon (
). To delete an IP address, click the delete icon (
).
Step 17
To add a static ARP entry, click
Add
.
The Add Static ARP Entry pop-up window appears.
Step 18
In the
IP Address
field, type an IP address for the static ARP entry.
Step 19
In the
MAC Address
field, type a MAC address to associate with the IP address. Enter the address using
the standard format of six groups of two hexadecimal digits separated by colons (for example,
01:23:45:67:89:AB
).
Step 20
Click
OK
.
The static ARP entry is added.
Tip
To edit a static ARP entry, click the edit icon (
). To delete a static ARP entry, click the delete icon
(
).
Step 21
Click
Save
.
The logical hybrid interface is added. Note that your changes do not take effect until you apply the device
configuration; see
configuration; see
Deleting Logical Hybrid Interfaces
License:
Control
Supported Devices:
Series 3
The following procedure explains how to delete a logical hybrid interface.
To delete a hybrid interface:
Access:
Admin/Network Admin
Step 1
Select
Devices > Device Management
.
The Device Management page appears.
Step 2
Next to the device where you want to delete the logical hybrid interface, click the edit icon (
).
The Interfaces tab for that device appears.
Step 3
Next to the logical hybrid interface you want to delete, click the delete icon (
).
Step 4
When prompted, confirm that you want to delete the interface.