Cisco Cisco Firepower Management Center 4000
11-15
FireSIGHT System User Guide
Chapter 11 Using Gateway VPNs
Managing VPN Deployments
To apply a VPN deployment:
Access:
Admin/Network Admin
Step 1
Select
Devices > VPN
.
The VPN page appears.
Step 2
Click the apply icon (
) next to the VPN deployment that you want to apply.
Step 3
When prompted, click
Yes
.
The VPN deployment is applied.
Tip
Optionally, from the Apply VPN deployment dialog box, click
View Changes
. The VPN Comparison View
page appears in a new browser window. For more information, see
Step 4
Click
OK
.
You are returned to the VPN page.
Viewing VPN Deployment Status
License:
VPN
Supported Devices:
Series 3
After you configure a VPN deployment, you can view the status of your configured VPN tunnels. The
VPN page displays a status icon for each applied VPN deployment:
VPN page displays a status icon for each applied VPN deployment:
•
The (
) icon designates that all VPN endpoints are up.
•
The (
) icon designates that all VPN endpoints are down.
•
The (
) icon designates that some endpoints are up, while others are down.
You can click a status icon to view the deployment status along with basic information about the
endpoints in the deployment, such as endpoint name and IP address. The VPN status updates every
minute or when a status change occurs, such as an endpoint going down or coming up.
endpoints in the deployment, such as endpoint name and IP address. The VPN status updates every
minute or when a status change occurs, such as an endpoint going down or coming up.
To view VPN status:
Access:
Admin/Network Admin
Step 1
Select
Devices > VPN
.
The VPN page appears.
Step 2
Click the VPN status icon next to the deployment where you want to view the status.
The VPN Status pop-up window appears.
Step 3
Click
OK
to return to the VPN page.