Cisco Cisco Administrative Workstation
ICM-to-ICM Gateway Configuration
Defining Client ICM Configuration Data
2-8
ICM-to-ICM Gateway User Guide for Cisco ICM Enterprise & Hosted Editions Release 7.1(1)
–
Both Side A and B. Both sides of the Client ICM prefer to use this
connection.
connection.
Note
Consider network traffic in choosing this value. For example, if one side
of the Client ICM is co-located with only one side of the Server ICM, you
can make that the preferred connection in order to avoid unnecessary
WAN traffic to the other side.
of the Client ICM is co-located with only one side of the Server ICM, you
can make that the preferred connection in order to avoid unnecessary
WAN traffic to the other side.
Step 9
When finished, click Save to save the changes.
Step 10
From the Application Gateway list, make note of the Application Gateway IDs
number(s) for the server system(s). You will need to specify these Application
Gateway ID number(s) during Server side configuration.
number(s) for the server system(s). You will need to specify these Application
Gateway ID number(s) during Server side configuration.
The bottom half of the ConnectionSide A and Connection Side B tabs display a
number of timeout and limit values. Accept the defaults for these values.
number of timeout and limit values. Accept the defaults for these values.
Configuring an Existing Gateway
If the gateway process is already present on the Router, perform the following
steps to configure it for ICM-to-ICM Gateway use.
steps to configure it for ICM-to-ICM Gateway use.
Step 1
Bring up the Calls > Application Gateway > Application Gateway List screen.