Cisco Cisco Administrative Workstation
2-15
ICM-to-ICM Gateway User Guide for Cisco ICM Enterprise & Hosted Editions Release 7.0(0)
Chapter 2 ICM-to-ICM Gateway Configuration
Server Configuration
Server Configuration
This section provides instructions for the configuration tasks you need to perform
on the Server ICM.
on the Server ICM.
Defining and Configuring the INCRP NIC
To set up the INCRP NIC for each instance on the Server ICM, you must perform
the following tasks:
the following tasks:
•
Install the INCRP NIC, if you have not already done so
•
Define the INCRP NIC using the NIC Explorer tool
•
Add INCRP NIC information using ICM Setup
Installing the INCRP NIC
If you need to install the INCRP NIC, refer to the ICM Installation Guide for
Cisco ICM Enterprise Edition for guidelines and procedures.
Cisco ICM Enterprise Edition for guidelines and procedures.
How to Define the INCRP NIC
Step 1
Within the ICM Admin Workstation group, double-click AW Select. The Select
ICM AW Service window appears.
ICM AW Service window appears.
Step 2
Select the instance you will be configuring.
Step 3
From the ICM Configuration Manager, invoke the NIC Explorer tool. The NIC
Explorer window appears.
Explorer window appears.
Step 4
In the Select filter data box, click Retrieve. This enables the Add NIC button.
Step 5
Click Add NIC. A new NIC and its routing client display in the tree window. Next
to each is a To Be Inserted icon.
to each is a To Be Inserted icon.
On the right of the tree window, tabbed fields also display the new NIC’s and
routing client’s configuration information.
routing client’s configuration information.
Step 6
Enter the following in the Logical Interface Controller tab fields: