Cisco Cisco SG300-28 28-Port Gigabit Managed Switch Technical References
DHCP Server Commands
283
OL-32830-01 Command Line Interface Reference Guide
12
Use the no ip dhcp pool Global Configuration mode command to delete a manual
binding.
binding.
Example
The following example deletes the address binding 10.12.1.99 from a DHCP
server database:
server database:
switchxxxxxx#
clear ip dhcp binding 10.12.1.99
12.5 client-name
To define the name of a DHCP client, use the client-name command in DHCP Pool
Host Configuration mode. To remove the client name, use the no form of this
command.
Host Configuration mode. To remove the client name, use the no form of this
command.
Syntax
client-name
name
no client-name
Parameters
•
name
—Specifies the client name, using standard ASCII characters. The
client name should not include the domain name. For example, the .name
Mars should not be specified as mars.yahoo.com. (Length: 1–32 characters).
Mars should not be specified as mars.yahoo.com. (Length: 1–32 characters).
Command Mode
DHCP Pool Host Configuration mode
Default Configuration
No client name is defined.
Example
The following example defines the string client1 as the client name.
switchxxxxxx(config-dhcp)#
client-name
client1