Cisco Cisco SG300-28 28-Port Gigabit Managed Switch Technical References

IP Addressing Commands

OL-32830-01 Command Line Interface Reference Guide

466

Command Mode

User EXEC mode

User Guidelines

If no interfaces are specified, all interfaces on which DHCP client is enabled are
displayed. If an interface is specified, only information about the specified
interface is displayed.

Example

The following is sample output of the show ip dhcp client interface command:

switchxxxxxx#

show ip dhcp client interface

VLAN 100 is in client mode

Address: 170.10.100.100 Mask: 255.255.255.0 T1 120, T2 192

Default Gateway: 170.10.100.1

DNS Servers: 115.1.1.1, 87.12.34.20

DNS Domain Search List: company.com

Host Name: switch_floor7

Configuration Server Addresses: 192.1.1.1 202.1.1.1

Configuration Path Name: qqq/config/aaa_config.dat

Image Path Name: qqq/image/aaa_image.ros

POSIX Timezone string: EST5EDT4,M3.2.0/02:00,M11.1.0/02:00

VLAN 1200 is in client mode

Address: 180.10.100.100 Mask: 255.255.255.0 T1 120, T2 192

Default Gateway: 180.10.100.1