Cisco Cisco SG300-28 28-Port Gigabit Managed Switch Technical References
Network Management Protocol (SNMP) Commands
865
OL-32830-01 Command Line Interface Reference Guide
45
•
excluded—Specifies that the view type is excluded.
•
oid-tree—(Optional) Specifies the ASN.1 subtree object identifier to be
included or excluded from the view. To identify the subtree, specify a text
string consisting of numbers, such as 1.3.6.2.4, or a word, such as System
and, optionally, a sequence of numbers. Replace a single sub-identifier with
the asterisk (*) wildcard to specify a subtree family; for example 1.3.*.4. This
parameter depends on the MIB being specified.
included or excluded from the view. To identify the subtree, specify a text
string consisting of numbers, such as 1.3.6.2.4, or a word, such as System
and, optionally, a sequence of numbers. Replace a single sub-identifier with
the asterisk (*) wildcard to specify a subtree family; for example 1.3.*.4. This
parameter depends on the MIB being specified.
Default Configuration
The following views are created by default:
•
Default—Contains all MIBs except for those that configure the SNMP
parameters themselves.
parameters themselves.
•
DefaultSuper—Contains all MIBs.
Command Mode
Global Configuration mode
User Guidelines
This command can be entered multiple times for the same view.
The command’s logical key is the pair (view-name, oid-tree). Therefore there
cannot be two commands with the same view-name and oid-tree.
cannot be two commands with the same view-name and oid-tree.
The number of views is limited to 64.
Default and DefaultSuper views are reserved for internal software use and cannot
be deleted or modified.
be deleted or modified.
Example
The following example creates a view that includes all objects in the MIB-II system
group except for sysServices (System 7) and all objects for interface 1 in the
MIB-II interface group (this format is specified on the parameters specified in
ifEntry).
group except for sysServices (System 7) and all objects for interface 1 in the
MIB-II interface group (this format is specified on the parameters specified in
ifEntry).
switchxxxxxx(config)#
snmp-server view
user-view system included
switchxxxxxx(config)#
snmp-server view
user-view system.7 excluded
switchxxxxxx(config)#
snmp-server view
user-view ifEntry.*.1 included