Cisco Cisco Prisma II EDR Receiver Installation Guide
4-10
Operation Using LCI
78-748704-01 Rev C
Start LCI,
Continued
3.
Verify that the chassis ID displayed in the Chassis ID box is the same number
that is dialed in on the chassis ID switch on the front of the Prisma II Chassis
that you are connected to.
To change the chassis ID, type the number in the box.
To change the chassis ID, type the number in the box.
4.
Click Start.
Result: The LCI software polls the chassis.
Result: The LCI software polls the chassis.
5.
When the refresh is complete, click OK.
Result: The chassis and modules appear in the device tree of the main
window of the LCI software.