Cisco Cisco Prisma II ICIM 2 Installation Guide
78-748704-01 Rev C
Operation Using LCI
4-1
Chapter 4
Operation Using LCI
Overview
Introduction
The procedures in this chapter apply if you are using the Local Craft Interface (LCI)
software to configure and operate the Prisma II bdr 2:1 Dual Receive Processor.
Included in this chapter are LCI software installation instructions and detailed
Included in this chapter are LCI software installation instructions and detailed
descriptions of how to use the LCI software to view and modify information for the
processor.
In This Chapter
This chapter contains the following topics.
Topic
See Page
LCI Introduction
4-2
System Requirements
4-3
Install LCI
4-4
Obtain and Install the Prisma II Driver Upgrade
4-7
Connect the Computer to the Chassis
4-8
Start LCI
4-9
LCI Device Tree Overview
4-11
Access the Device Details Window
4-12
Check the Operating Status
4-15
Configure the Processor
4-17
Check Processor Alarms
4-20
4-22
WARNING:
Avoid damage to your eyes! Do not look into any optical connector while the
system is active. Even if the unit is off, there may still be hazardous optical
levels present.