Cisco Prisma II 1310 nm HDTx Transmitters Installation Guide
2-26
Installation
78-748704-01 Rev C
Master/Slave Connections Overview
Introduction
This overview describes the:
•
•
Interface panel terminal strips
•
Typical master/slave jumper connections for modules in the same chassis and in
separate chassis
Interface Panel Terminal Strips
On the interface panel terminal strips, all chassis slots except for slot 1 and slot 3 are
available. Each chassis slot has two outputs (A and B) and two inputs (A and B) for
communication of alarm information to or from other modules. However, on most
Prisma II modules, the B output is disabled.