Cisco DNCS System Release 2.7 3.7 4.2 Technical References

Page of 4
 
 
 
  
Changing the Time Delay to Suspend Level 2 Applications 
Overview  
Introduction  
An application that uses the Cisco Resident Application (SARA) Window Manager is 
referred to as a Level 2 application. Subscribers can access SARA functions such as the 
Interactive Program Guide directly from a Level 2 application.  
When a subscriber tunes away from a channel that is displaying a Level 2 application, 
the application may require some clean up processing time before displaying the next 
channel.   
The time delay required to suspend Level 2 applications for clean up processing differs. 
Some Level 2 applications require a 2-second delay while others may require more or less 
time.  
If the time delay allotted for the application is not sufficient, the subscriber may see 
unexpected behavior, such as a black screen, when tuning away from the application.   
For SARA 1.15 and SARA 1.16, you must insert a time delay parameter that is appropriate 
for the specific Level 2 application to eliminate the unexpected behavior.  
Note: In SARA 1.21 and later, you do not need to insert the time delay parameter because 
this URL modifier is not supported. Changes in the Application Interface System (AIS) 
functions, from which the application developer creates the application, prevent the need 
for time delays in the later SARA versions.  
Purpose  
The purpose of this technical bulletin is to provide cable service operators, third-party 
developers, and technicians with instructions for changing the time delay parameter to 
suspend Level 2 applications.  
Document Version  
This is the third release of this technical bulletin. This version contains text and graphic 
changes. This bulletin also includes SARA 1.16 whose functionality is equivalent to SARA 
1.15.