Cisco Cisco IPCC Web Option Installation Guide

In the Address field, enter the IP address or hostname for the CWC Gateway.

In the Port field, enter the TCP port to use for connection to the CWC Gateway.

How to Configure the GKTMP NIC

In the GKTMP NIC Properties dialog box, use the Network Interface Controller Properties to
apply settings to the NIC device.

In the Local IP Address field, enter the IP address or host name for the GKTMP NIC.

In the Listening TCP Port Number field, enter the port number that the GKTMP NIC will use
to listen for TCP/IP connections.

In the Physical Controller ID field, enter the Integer identifier for the GKTMP NIC from the
Physical_Interface_Controller table in the ICM database.

In the Maximum number of Sessions field, enter the number of sessions you want the NIC to
support. The GKTMP NIC supports up to a maximum of 64 sessions.

In the RAS Port Number field, enter the port number used in the LCF response message for
the Registration, Admission and Status protocol address. The default is 1719.

Check the Provide distinct LRQ destInfo alias address space box if you want the GKTMP
NIC to add a special prefix character to all LRQ destinationInfo aliases before they go to the
NAM router.

Check the Cycle through alternate EP selections box to enable the GKTMP NIC to cycle
alternate EP selections. A maximum of ten endpoint transport addresses are configurable in the
NAM.

How to Configure the INCRP NIC

Refer to the Setup and Configuration Guide for Cisco ICM Hosted Edition for information on
configuring the INCRP NIC.

How to Configure the MCI NIC

In the MCI NIC Properties dialog box, enter the Physical controller ID value from the
Configuration Manager.

Typically, you do not need to change any other values in this dialog box. The first field is
initialized to the high priority, private network IP address of the CallRouter machine. The other
values are standard defaults for all MCI NICs.

ICM Installation Guide for Cisco ICM Enterprise Edition Release 7.0(0)