Cisco Cisco Email Security Appliance C680 Installation Guide
7
•
Router: 192.168.42.1
Step 7
Click OK.
8
Connect to the Appliance
The Cisco C190 appliance has two gigabit network ports:
Data 1
and
Data 2
. At least one static IP address is required to
send and receive email.
You can receive and deliver email from a single connection to
either network port if your network topology dictates it. Two IP
addresses can be configured on one network interface.
either network port if your network topology dictates it. Two IP
addresses can be configured on one network interface.
Alternatively, you can connect the
Data 1
network port to your
public network and connect the
Data 2
network port to your
private network.
To access the appliance by Ethernet, connect to
Data 1
as your
management interface and configure incoming email on
Data 2
.
For serial access to the appliance, connect to the console port.
Item
Port
Description
1
Remote
Power Cycle
Power Cycle
The port that is used for Remote
Power Cycle (RPC).
Power Cycle (RPC).
2
Console
The console port that directly
connects a computer to the
appliance.
connects a computer to the
appliance.
3
Data 1
A Gigabit Ethernet customer data
interface. This port is used as a
management interface.
interface. This port is used as a
management interface.
4
Data 2
A Gigabit Ethernet customer data
interface.
interface.