Cisco Cisco Email Security Appliance C190 Installation Guide
6
For Windows
The exact steps depend on your operating system version.
Step 1
Go to the Start menu and choose Control Panel.
Step 2
Click Network and Internet, then Network and Sharing
Center.
Center.
Step 3
Click the Change adapter settings link.
Step 4
Right-click Local Area Connection and choose
Properties.
Properties.
Step 5
Click Internet Protocol Version 4, then choose
Properties.
Properties.
Step 6
Note your current settings.
Step 7
Select Use the Following IP Address.
Step 8
Enter the following changes:
•
IP Address: 192.168.42.43
•
Subnet Mask: 255.255.255.0
•
Default Gateway: 192.168.42.1
Step 9
Click OK and Close to exit the dialog box.
For Mac
The exact steps depend on your operating system version.
Step 1
Launch the Apple menu and choose System Preferences.
Step 2
Click Network.
Step 3
Click the lock icon to allow changes.
Step 4
Select the network configuration with the green icon.
This is your active connection. Then click Advanced.
This is your active connection. Then click Advanced.
Step 5
Click the TCP/IP tab and from Ethernet settings,
choose Manually from the drop-down list.
choose Manually from the drop-down list.
Step 6
Enter the following changes:
•
IP Address: 192.168.42.43
•
Subnet Mask: 255.255.255.0