Cisco Headend System Release 2.7 Installation Guide
Chapter 3 SR 2.8.1/3.8.1/4.3.1
78
4036043 Rev B
Check the EAS Configuration—Post Upgrade
Checking the EAS Configuration
After installing the SR 2.8.1/3.8.1/4.3.1 software, verify that your EAS equipment is
working correctly by testing the system’s ability to transmit EAS messages.
Complete all of the procedures in Chapter 5, Testing the EAS, of Configuring and
Troubleshooting the Digital Emergency Alert System (part number 4004455).
After completing the procedures in Chapter 5, Testing the EAS, of the Configuring
and Troubleshooting the Digital Emergency Alert System, For Use With All System Releases
guide, verify that you can generate an EAS message for the Emergency Alert
Controller (EAC), itself.
working correctly by testing the system’s ability to transmit EAS messages.
Complete all of the procedures in Chapter 5, Testing the EAS, of Configuring and
Troubleshooting the Digital Emergency Alert System (part number 4004455).
After completing the procedures in Chapter 5, Testing the EAS, of the Configuring
and Troubleshooting the Digital Emergency Alert System, For Use With All System Releases
guide, verify that you can generate an EAS message for the Emergency Alert
Controller (EAC), itself.