Cisco Cisco SA520W Security Appliance Release Notes

Release Notes for SA500 Series Security Appliances Firmware Version SA500-K9-2.2.0.7

7

The following issues were resolved in firmware version SA500-K9-2.2.0.7.

CSCtj07896

Resolved an issue in which a SIP Call was blocked for Tandberg E20.

CSCtj74144

Resolved an issue in which the monthly traffic limit could not be set higher than 99.99 
GB.

CSCtl51486

Fixed an issue in which the SSL VPN Server Portal did not display the Optional WAN 
address when the WAN was configured in Load Balancing mode.

CSCtq95726

Fixed an issue in which HTTP traffic (port 80) used the WAN address instead of the IP 
Alias address when 1-to-1 NAT and content filtering were enabled.

CSCtr23708

Fixed an issue in which Linux vpnc 0.5.3 failed to establish connection with the security 
appliance.

CSCtr58108

Fixed an issue in which a VPN client cannot browse to Internet when content filtering 
was enabled.

CSCtr60047

Fixed an issue in which the Average Per Day feature in the Traffic Meter did not display 
the correct data.

CSCts00493

Fixed an issue in which DHCP relay functionality was not working across VLANs.

CSCts41462

Fixed an issue in which Approved Clients were blocked if Block All URLs by Default was 
enabled

CSCts64683

Resolved an issue related to PCI compliance.

CSCtt38167

Added support to send the service name to the ISP during PPPoE connection requests.

CSCtu30564

Fixed an issue with port triggering.

CSCtw64769

Fixed an issue in which there was a loss of WAN connectivity if a user attempted to 
initiate outgoing traffic prior to the completion of a reboot and before the SNAT rule 
could be applied.

CSCtw75087

Fixed an issue in which a bandwidth profile could not be configured for the optional 
WAN port.

CSCty05022

Modified the log settings so that a Protect Link blocking event is logged as a Warning 
rather than Informational.