Cisco Cisco Network Assistant Version 2.0 White Paper
12
Secure Network Foundation Implementation Guide for Single Site Deployments
Secure Network Foundation
Figure 6
Firewall and ACL Configuration Window
Configuring the Intrusion Prevention System
Perform the following steps to configure the Intrusion Prevention System.
Step 1
From the Main menu, click Configure and choose IPS from the Task pane.
Step 2
From the Create IPS window, click Launch IPS Rule Wizard and then click OK in the SDEE
notification window.
notification window.
Step 3
Click OK on the SDM subscription window, then click Next on the Welcome to the IPS Policies Wizard
window.
window.
Step 4
Choose both the inbound and outbound inspection rules for the WAN and LAN interfaces from the Select
interfaces window and click Next.
interfaces window and click Next.
Step 5
Click Add for the SDF Location, using the default setting of Specify SDF on flash and choose the
signature file from the drop-down list (the 256MB.sdf file is the default for the 2851). Click OK and
then click Next.
signature file from the drop-down list (the 256MB.sdf file is the default for the 2851). Click OK and
then click Next.
Note
If an information box regarding the order of SDF file locations is displayed, click OK.
Step 6
In the summary window, review the options and click Finish.
Step 7
After the configuration is delivered to the router, click OK.