Cisco Cisco Network Assistant Version 5.7 White Paper

Secure Network Foundation Implementation Guide for Single Site Deployments

Secure Network Foundation

Figure 2

SDM Web Interface Window

Configuring Local Area Networking

Perform the following steps to configure Local Area Networking.

Step 1

From the Main menu, click Configure and choose Interfaces & Connections from the Task pane.

Step 2

Choose Ethernet LAN and click Create New Connection.

The Layer 3 Ethernet Interface Configuration Wizard opens.

Step 3

Click Next.

Step 4

For an Ethernet configuration, choose Configure this interface for 802.1Q trunking. For an 802.1Q
configuration, enter the VLAN ID for the Cisco-Data VLAN and place a check mark in the Native
VLAN check box.

Step 5

Click Next.

Step 6

Enter the IP address and subnet mask designated for this interface. For example, the LAN interface
should be configured with a private, or reserved, IP address, such as 10.20.31.1/24. Click Next.

Step 7

For DHCP Server, choose Yes to enable the DHCP server on the LAN interface and click Next.