Brother MFC-J4710DW User Guide
PhotoCapture Center™: Printing photos from a memory card or USB Flash memory drive
69
8
l
If you do not want to change additional
settings, press
or OK.
Press Start to print.
Print Date
8
You can print the date if it is already in the
data on your photo. The date will be printed
on the lower-right corner. If the data doesn’t
have the date information, you cannot use
this function.
data on your photo. The date will be printed
on the lower-right corner. If the data doesn’t
have the date information, you cannot use
this function.
a
Open the media slot cover.
b
Put the memory card or USB Flash
memory drive in the correct slot.
memory drive in the correct slot.
c
Press Photo.
d
Swipe left or right to display
View Photos.
View Photos.
e
Press View Photos.
Press OK.
Press OK.
f
Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it and then
press OK.
display each photo. When the photo you
want is displayed, press it and then
press OK.
g
Press OK.
h
Press Print Settings.
i
Swipe up or down, or press a or b to
display Print Date.
display Print Date.
j
Press Print Date.
k
Press On (or Off).
l
If you do not want to change additional
settings, press
or OK.
Press Start to print.
NOTE
The DPOF setting on your camera must
be turned off to use the Print Date
feature.
be turned off to use the Print Date
feature.
Setting your changes as the
new default
new default
8
You can save the print settings you use most
often by setting them as the default settings,
such as Print Quality, Paper Type,
Paper Size, Print Size,
Auto Correct, Brightness, Contrast,
Color Enhance, Cropping, Borderless
and Print Date. These settings will stay
until you change them again.
often by setting them as the default settings,
such as Print Quality, Paper Type,
Paper Size, Print Size,
Auto Correct, Brightness, Contrast,
Color Enhance, Cropping, Borderless
and Print Date. These settings will stay
until you change them again.
a
Open the media slot cover.
b
Put the memory card or USB Flash
memory drive in the correct slot.
memory drive in the correct slot.
c
Press Photo.
d
Swipe left or right to display
View Photos.
View Photos.
e
Press View Photos.
Press OK.
Press OK.
f
Swipe left or right, or press d or c to
display each photo. When the photo you
want is displayed, press it and then
press OK.
display each photo. When the photo you
want is displayed, press it and then
press OK.
g
Press OK.
h
Press Print Settings.
i
Press your new setting.
Repeat this step for each setting you
want to change.
Repeat this step for each setting you
want to change.
j
After changing the last setting, swipe up
or down, or press a or b to display
Set New Default.
or down, or press a or b to display
Set New Default.
k
Press Set New Default.
l
The Touchscreen asks you to confirm
the change to the new default settings.
Press Yes to confirm.
the change to the new default settings.
Press Yes to confirm.
m
Press .