Transition Networks SISTF1010-250-LRT Leaflet
Transition Networks, Inc.
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
Worldwide Headquarters:
10900 Red Circle Drive
Minnetonka, MN 55343 USA
tel: 952.941.7600 / 800.526.9267
fax: 952.941.2322
info@transition.com
http://www.transition.com
fax: 952.941.2322
info@transition.com
http://www.transition.com
©2010 Transition Networks, Inc.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
All trade marks are the property of their respective owners.
Technical information is subject to change without notice.
Specifications
Standards
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
Data Transfer Rate
Copper: 10/100Mbps, 14,880 pps / 148,800 pps
Filtering Addresses
2K MAC Address Table
Backplane
-250 model: 1.0Gbps
-280 model: 1.6Gbps
-280 model: 1.6Gbps
Status LEDs
PWR 1 (Power): ON = primary power connected
PWR 2 (Power): ON = backup power connected
FAULT, per port: LNK/ACT, FDX/COL
PWR 2 (Power): ON = backup power connected
FAULT, per port: LNK/ACT, FDX/COL
Dimensions
Width: 1.2" [30 mm]
Depth: 3.7" [95 mm]
Height: 5.5" [140 mm]
Depth: 3.7" [95 mm]
Height: 5.5" [140 mm]
Ingress Protection
IP 30
Input Power
12 - 48 VDC; redundant power with
reverse polarity protection and
removable terminal block
reverse polarity protection and
removable terminal block
Overload Current Protection
Present
Power Consumption
-250 models: 2.93 Watts
-280 models: 4.71 Watts
-280 models: 4.71 Watts
Environment
-40 to +75°C Ext. operating temp.
5%– 95% humidity non-condensing
0 – 10,000 ft. altitude
-40 to +85°C storage temp.
5%– 95% humidity non-condensing
0 – 10,000 ft. altitude
-40 to +85°C storage temp.
Shipping Weight
1.4 lbs. [0.64 kg]
Safety Compliance
UL, cUL, CE/EN60950-1
UL Class 1 Div 2 for hazardous environments
UL Class 1 Div 2 for hazardous environments
EMI Compliance
CISPR22/EN55022; EN60950 Class A; FCC Class A;
CE Mark;CE EN61000-4-2; CE EN61000-4-3; CE EN-
61000-4-4; CE EN61000- 4-5; CE EN61000-4-6; CE
EN61000-4-8; CE EN61000-4-11; CE EN61000-4-12;
CE EN61000-6-2; CE EN61000-6-4
CE Mark;CE EN61000-4-2; CE EN61000-4-3; CE EN-
61000-4-4; CE EN61000- 4-5; CE EN61000-4-6; CE
EN61000-4-8; CE EN61000-4-11; CE EN61000-4-12;
CE EN61000-6-2; CE EN61000-6-4
Environmental Compliance
IEC60068-2-32 (Free fall); IEC60068-2-27 (Shock);
IEC60068-2-6 (Vibration); IEC60068-2-3,
IEC60068-2-30, IEC60068-2-31
IEC60068-2-6 (Vibration); IEC60068-2-3,
IEC60068-2-30, IEC60068-2-31
Warranty
Lifetime
Industrial Switch
Certified for use in
Hazardous Locations
Certified for use in
Hazardous Locations
Transition’s Industrial Switches with
Class 1 Div 2 Certification are hard-
ened devices designed to reliably op-
erate in harsh environments such as
those found on factory floors, outdoor
enclosures, oil and gas refining,
chemical plants or other hazardous
environments.
Class 1 Div 2 Certification are hard-
ened devices designed to reliably op-
erate in harsh environments such as
those found on factory floors, outdoor
enclosures, oil and gas refining,
chemical plants or other hazardous
environments.
Ordering Info
Extended Operating Temperature:
-40°C to +75°C
-40°C to +75°C
SISTF1010-250-LRT (extended temp)
(5) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
SISTF1010-280-LRT (extended temp)
(8) 10/100BASE-TX (RJ-45)
[100 m/328 ft.]
Optional Accessories
(sold separately)
(sold separately)
External AC/DC Power Supply:
SPS-UA12DHT
(100-240 VAC input - 25°C to +70°C
operating temperature)
operating temperature)
SISTF1010-2x0-LRT
industrial switch
AUTO NEG
AUTO CROSS
Class 1 Div 2 Industrial Switch 10/100BASE-TX
Industrial
Industrial Class 1 Div 2 Certified Switch
Features
Auto-Negotiation
AutoCross™
Store-and-Forward
Switching Architecture with
MAC Address Table
MAC Address Table
Extended (-40°C to 75°C)
operating temperature
Dry Contact Relay Alarm Output
Dual, Redundant DC Power Inputs
DIN Rail Mounting and Wall
Mount Brackets Included
Reverse Polarity Power
Input Protection
Overload Current Protection
DIN Rail Mounting and Wall
Mount Brackets Included
Barrel connector interface cable
included for connecting
external AC/DC power supply
external AC/DC power supply
Class 1 Div 2 Certified
Utilize Ethernet Connectivity in Industrial Automation